16*10Gb SFP+interface, 4*40Gb QSFP interface, in which, 8*10Gb SFP+ can be configured ti 8Gb FC port;
QSFP interface is applicable to witch stacks or can be switched into 4 10Gb through switching module
16*10GB interface (corresponding to mainboard Mezz card)
16x10Gb SFP+ interfaces
4x40Gb QSFP extension modules, to support the stacking, and each port can support to convert to 4 * 10G b1×RJ45 management and maintenance interfaces.
16x10Gb links connect to 10G Mezz on the blade.
Support the standard L2 and L3 switching (IPv4&IPv6).
Support the data center feature function.
Support FCoE (16 uplink ports) and FC (8 ports in 16 uplink ports)
SNMP v1/v2/v3, Telnet, Console, MGMT, WEB, RMON, SSHv1/v2 and FTP/TFTP file upload and download management, support the NTP clock, Syslog, SPAN/RSPAN and IPFIX flow analysis.
Can carry out the network configuration and the FW upgrading by the system management module directly.
Provides switch monitoring and management interface (temperature, voltage, log and alarm information). The alarm information can be informed to the management module.
Support the boot, shutdown and restart of the switching module by the management module.
Can configure the switching module by the management module (two modes, the command line and management interface).
2* hot-swap fan modules
Copyright © 2017 Inspur. All Rights Reserved.