The new generation 1U two-socket NF5170M4 rack server facilitates high-density solutions by providing many options for embedded network and storage controllers in a limited 1U space.
Various integrated solutions
Mainboard integrated SAS controller can configure SAS hard disks without occupying valuable PCI-E slots.
Motherboard integrated quad 1 GB and dual 10 GB network cards create the flexibility to meet different data center network configurations and performance requirements
Supports a maximum of 2.5-inch hot swap hard disks or solid state hard disks, or four 3.5-inch hot-plugging hard disks and two 2.5-inch hot-plugging hard disks or solid state hard disks.
2 Intel® Xeon® E5-2600 v3/v4 processors
QPI Bus Speed
16 Memory Slots, Supports a maximum of DDR4-2400 memory, maximum 2TB memory (when using the single 128GB memory)
Supports mirroring, hot standby and other advanced features
Hard Disk Controller
Onboard SAS 12GbHard disk controller
Supports 0/1/5/6/10/50/60 RAID with battery protected high performance cache.
Up to 8 x 2.5″ hot-plug SATA/SAS hard disk
Up to 4 x 3.5″ hot-plug SATA/SAS hard disk, and 2 x 2.5″ hot-plug SSD
I/O Expansion Slot
2 standard PCI-E 3.0, supporting one full-height
Integrated I/O Port
Front: 2 USB port; 1 standard VGA interface Rear: 2 USB interfaces; 1 standard VGA interface Internal: 2 USB ports and 1 internal serial port
Option 1: Onboard quad ports 1Gb Intel I350
Option 2: Onboard dual ports 10G SFP+ Intel 82599 controller and onboard dual port 1Gbe Support virtual acceleration, network acceleration, load balancing, redundancy and other advanced features
Supports platinum / titanium power supply, optional 1+1 redundancy, and supports PMBus function
110 – 240VAC, 40 – 60 VDC
Copyright © 2020 Inspur. All Rights Reserved.